Semiconductor
Silicon Wafer
Precision Optics - Technical Glass
Flat Panel Display
Ophthalmic
Flat Glass & Mirror
Solar Industry

Certified By: ISO 9001:2015
Silicon Wafer
 
Post-Lap Cleaning >> Vector HTC-SCA Series

ULTRASONIC/MEGASONIC DETERGENTS

 

VECTOR HTC-SCA Series are water-based detergents formulated to increase the cavitational energy released upon the substrate surface by ultrasonic or megasonic apparatus.  The products are designed for more effective cleaning of post-lapped, post-etched and post-polished substrates. Used at economical dilution ratios, VECTOR HTC-SCA Series will remove light organics, polymers and sub-micron particles typically found on the surface of semiconductor materials.  These contaminants are often the cause of wafer staining and streaking upon examination after etch.

 

VECTOR HTC-SCA Series detergents are recommended for pre-cleaning and final cleaning stages of solar silicon production lines, wherever ultrasonic cleaning is applied. These products will remove organic and inorganic contamination and particles from both mono-crystalline and multi-crystalline silicon. 

 

VECTOR HTC-SCA Series can be used in heated or unheated ultrasonic tanks, and are also recommended for brush and dip tank applications. 

 

There are 6 Products in the SCA Series: VECTOR HTC-SCA, VECTOR HTC-SCA-N, VECTOR HTC-SCA-1, VECTOR HTC-SCA-1-N, VECTOR HTC-SCA-2 and VECTOR SCA-13.

 

Benefits:

  • Superior wetting ability
  • Free rinsing - leaves no film or residue
  • Fully compatible with other VECTOR products
  • Economical to use and easy to filter

 

Directions:
It is recommended that evaluation of VECTOR HTC-SCA Series begin at dilutions of 4% mixed with deionized (DI) water, although tap water that does not contain hard water ions is also acceptable. Since the type and degree of residue to be removed varies, these factors will ultimately determine specific “in-house” dilutions. Other factors to consider include wafer exposure time and the power of the ultrasonic equipment in use.

 

Additional Information:
VECTOR Products are available in 5-gallon pails and 55-gallon drums, F.O.B. Bethel, Connecticut, and also include grinding fluids, sawing fluids, suspension agents for lapping/polishing slurries, and rinse/wet storage additives. Material Safety Data Sheets available upon request.



 



Copyright 2004 INTERSURFACE DYNAMICS.
All Rights Reserved.